Trimble R780 GNSS System

For sale Trimble R780 GNSS Rover, 1-year Trimble warranty, 900MHz radio, batteries, charger, antenna, rod, pelican case.

$9,500

For sale Trimble R780 GNSS Rover, brand new 1-year Trimble warranty, comes complete with 900MHz radio, batteries, charger, antenna, rod, pelican case.

Trimble R780 GNSS systems

The Trimble R780 GNSS receiver is a highly accurate GNSS system built to handle the toughest survey environments. 336 GNSS channels supported, global model, no any regional restrictions. Powered by industry leading Trimble GNSS positioning technologies, the ultra-rugged R780 elevates productivity in one adaptable, scalable system.

Enjoy the freedom to choose the configuration and features tailored precisely to meet the needs of your job, and the flexibility to add more functionality as requirements change. Build the receiver you need today. Scale with ease tomorrow.

Built-in Trimble TIP technology allows you to survey faster with magnetically immune Inertial Measurement Unit (IMU) based tilt compensation that helps you quickly, accurately, and safely stake out or measure points without levelling the pole.

The R780 GNSS Smart Antenna can utilize more GNSS constellations, satellites, and signals than traditional GPS, so it delivers greater accuracy in more challenging conditions such as under tree canopy and in congested construction sites. That also means more uptime using the system and more productivity for job crews.

Key Features:

Configurable receiver, scalable for future requirements.
Available in base & rover, rover only, or base only configurations.
Trimble® Inertial Platform™ (TIP™) technology for magnetically immune IMU-based tilt compensation.
Trimble ProPoint GNSS positioning engine for improved accuracy and productivity in challenging GNSS conditions.
Trimble Maxwell™ 7 GNSS ASIC.
9 GB internal memory.
Trimble xFill® correction outage technology.
Supports Trimble CenterPoint® RTX corrections for RTK level accuracy worldwide via satellite/IP.
Military-grade ultra-rugged design, IP68 rating.
Optimized for Trimble Access™ field software.

TRIMBLE R780 SPECIFICATIONS

PERFORMANCE SPECIFICATIONS
GNSS TECHNOLOGY
	Constellation agnostic, flexible signal tracking, improved positioning in challenging environments and inertial measurement integration with Trimble ProPoint GNSS technology Increased measurement and stakeout productivity and traceability with Trimble TIP™ technology IMU-based tilt compensation Trimble RTX® worldwide corrections Advanced Trimble Maxwell 7 technology Trimble EVEREST™ Plus multipath signal rejection Spectrum Analyzer to troubleshoot GNSS jamming Anti-spoofing capabilities Japanese LTE Filtering below 1510 MHz allows antennas to be used 100 m away from Japanese LTE cell tower Iridium Filtering above 1616 MHz allows the antenna to be used 20 m away from Iridium transfer
SATELLITE TRACKING
GPS	L1C, L1 C/A, L2E (L2P), L2C, L5
GLONASS	L1C/A, L1P. L2C/A, L2P, L3
Galileo	E1, E5A, E5B and E5AltBOC, E62
BeiDou	B1, B2, B3, B1C, B2A
QZSS	L1 C/A, L1C, L1S, L2C, L5, LEX/L6
IRNSS	L5
SBAS	L1 C/A (EGNOS/MSAS GAGAN/SDCM), L1 C/A and L5 (WAAS)
L-Band	Trimble RTX
POSITIONING PERFORMANCE
STATIC GNSS SURVEYING
High-Precision Static	Horizontal: 3 mm + 0.1 ppm RMS Vertical: 3.5 mm + 0.4 ppm RMS
Static and Fast Static	Horizontal: 3 mm + 0.5 ppm RMS Vertical: 5 mm + 0.5 ppm RMS
REAL TIME KINEMATIC SURVEYING
Single Baseline < 30 km	Horizontal: 8 mm + 1 ppm RMS Vertical: 15 mm + 1 ppm RMS
Network RTK	Horizontal: 8 mm + 0.5 ppm RMS Vertical: 15 mm + 0.5 ppm RMS RTK start-up time for specified precisions: 2 to 8 seconds
TRIMBLE INERTIAL PLATFORM (TIP) TECHNOLOGY
TIP Compensated Surveying	Horizontal: RTK + 8 mm + 0.5 mm/° tilt (up to 30°) RMS
IMU Integrity Monitor	Bias monitoring: Temperature, age and shock
TRIMBLE RTX CORRECTION SERVICES
CenterPoint RTX	Horizontal: 2 cm RMS Vertical: 5 cm RMS RTX convergence time for specified precisions in Trimble RTX Fast regions: < 1 min RTX convergence time for specified precisions in non RTX Fast regions: < 3 min RTX QuickStart convergence time for specified precisions: < 5 min7
TRIMBLE xFILL
Horizontal	RTK + 10 mm/minute RMS
Vertical	RTK + 20 mm/minute RMS
TRIMBLE xFILL PREMIUM
Horizontal	3 cm RMS
Vertical	7 cm RMS
POSITIONING PERFORMANCE Cont.
CODE DIFFERENTIAL GNSS POSITIONING
Horizontal	0.25 m + 1 ppm RMS
Vertical	0.50 m + 1 ppm RMS
SBAS	Typically < 5 m 3DRMS
HARDWARE
ELECTRICAL
Internal	Rechargeable, removable Lithium-ion battery in internal battery compartment Internal battery operates as a UPS during an ext power source failure Internal battery will charge from external power source as long as source can support the power drain and is more than 11.8 VDC Integrated charging circuitry
External	External power input with over-voltage protection on Port 1 (7-pin Lemo 2-key) Minimum 10.8 V, Maximum 28 VDC, shutdown optimized for 12 V lead acid battery operation Power source supply (Internal/External) is hot-swap capable in the event of power source removal or cut off DC external power input with over-voltage protection on Port 1 (Lemo) Receiver automatically turns on when connected to external power
Power consumption	3.2 W in rover mode with internal receive radio12 5.2 W in base mode with internal 0.5 W transmit radio
Operating times on internal battery
Rover	5.5 hours; varies with temperature
Base station	5.5 hours; varies with temperature
450 MHz systems	Approximately 4 hours; varies with temperature
900 MHz systems	Approximately 4 hours; varies with temperature
PHYSICAL
Dimensions (W×H)	13.9 cm x 13 cm (5.5 in x 5.1 in) including connectors
Weight	1.55 kg (3.42 lb) receiver only including radio and battery
Temperature	Operating: -40 °C to +65 °C (-40 °F to +149 °F) Storage: -40 °C to +75 °C (-40 °F to +167 °F)
Humidity	100%, condensing
Ingress protection	IP68 Certified per IEC-60529: waterproof/dustproof (1 m submersion for 1 hour)
Shock and vibration	Pole drop: Designed to survive a 2 m (6.6 ft) pole drop onto concrete Shock Non-operating: 75 Gs at 6msec Shock Operating: 40 Gs at 10msec Vibration: Mil-Std-810G, FIG 514.6E-1 Cat 24, Mil-Std-202G, FIG 214-1, Condition D
COMMUNICATIONS AND DATA STORAGE
Lemo (Serial 1)	7-pin Lemo 2-key, Power Input, USB. Optional USB to RS232 serial cable. Receiver supports RNDIS communications over USB
Wi-Fi	Client or Access Point. Receive or transmit corrections. Wi-Fi b/g/n
Bluetooth® wireless technology	Fully-integrated sealed 2.4 GHz Bluetooth module
Integrated radios (optional)	Fully-integrated, fully-sealed internal 403-473 MHz; Internal 900 MHz; Rx/Tx
Channel spacing (450 MHz)	12.5 kHz or 25 kHz spacing available
Sensitivity (450 MHz)	-114 dBm (12 dB SINAD)
450 MHz output power	0.5 W, 2.0 W, depending on the local required licensing.
Frequency approvals (403-473 MHz)	Worldwide, depending on the local required licensing.
Positioning rates	1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 Hz
Data storage	9 GB internal data logging. Moving base and heading
Data format	CMR+, CMRx, RTCM 2.1, RTCM 2.3, RTCM 3.0, RTCM 3.1, RTCM 3.2 input and output 24 NMEA outputs, GSOF, RT17, and RT27 outputs
CERTIFICATIONS
	FCC Part 15 Subpart B (Class B Device), Part 15.247, Part 90 Canadian ICES-003 (Class B), RSS-GEN, RS-102, RSS-247 IEC62368-1 2nd Edition CISPR 32, EN 55032, EN55035 RCM mark, AS/CISPR 32, AS/NZS 4768 Japan MIC CE mark, Radio Equipment Directive (RED 2014/53/EU) RoHS compliance WEEE compliance

TRIMBLE INTEGRATED GNSS SYSTEMS COMPARATION

	Trimble R780	Trimble R12	Trimble R12i
Max. Precision	8 mm H/15 mm V	8 mm H/15 mm V	8 mm H/15 mm V
Channels	336	672	672
Antenna	Integrated	Integrated	Integrated
UHF Radio	Receive & Transmit	Receive & Transmit	Receive & Transmit
RTK Compatible	Yes	Yes	Yes
xFill	Yes	Yes	Yes
Memory	9 GB	6 GB	6 GB
Cellular	External	Yes	Yes
Satellites	GPS, GLONASS, Galileo, BeiDou, NavIC, QZSS, SBAS	GPS, GLONASS, Galileo, BeiDou, NavIC, QZSS, SBAS	GPS, GLONASS, Galileo, BeiDou, NavIC, QZSS, SBAS
Additional Features	ProPoint, TIP Tilt Compensation	ProPoint	ProPoint, TIP Tilt Compensation

Product Category