Trimble 5800 GPS Base Rover RTK TSC2
Very good condition Trimble 5800 GPS Base Rover RTK System with internal radio 450-470Mhz and Trimble TSC2
Condition: Used
Complete Trimble 5800 Base and Rover system is in very good condition, has been tested by a certified Trimble dealer to be in excellent working order.
The TSC2 is completely up to date with WM5 and Survey Controller v12.49. Both receivers are completely up to date with firmware v2.32. Everything was tested, powers on, tracks GPS SV's and internal radio recieved signal well.
Sale Includes:
- Trimble 5800 GPS BASE Receiver (connect your radio data link to this reciever)
- Trimble 5800 GPS Rover Receiver with 450-470 MHz internal radio
- Trimble TSC2 with Survey Controller v12.49
- Brand new TSC2 Handstrap
- Brand new TSC2 Stylus Lanyard
- Genuine Trimble Dual Battery charger for receiver batteries
- Brand new adapter for TSC2 with global plug set
- 2x Brand new 430 – 470 MHz Rubber Antenna
- Brand new TSC2 padded case
- Extra Screen protectors and Stylus for TSC2
- Trimble Pelican Case
A SCALABLE GPS SOLUTION FOR A RANGE OF SURVEYING NEEDS
The Trimble® 5800 GPS receiver provides reliability and simplicity for basic surveying tasks. You can trust that the proven design of the Trimble 5800 will perform under the toughest conditions.
Integrated system
Because the Trimble 5800 GPS receiver's components are completely integrated, the system is lightweight and ergonomic—and completely cable-free. 2 MB of internal memory makes collecting data for postprocessing extremely easy and efficient, whether for static or kinematic (stop-and-go) surveying.
The Trimble 5800 can also be used as a base station, so it is versatile to meet the changing needs of your business.
Advanced technology
The Trimble 5800 GPS system offers advanced Trimble GPS technology. It is a 24-channel dual-frequency GPS receiver, containing Trimble’s proven Maxwell™ technology for robust tracking in difficult GPS environments.
Two additional channels for WAAS and EGNOS tracking let you perform real-time differential surveys to GIS grade without a base station.
The dual-frequency Trimble antenna enhances the tracking capabilities of the Trimble 5800—the patented four-point antenna feed provides submillimeter phase center stability for precise results. The position of the UHF radio antenna mounting further increases accuracy by being out of the GPS line-of-sight, reducing multipath and avoiding interference with the GPS antenna.
For rover communications use the built-in 450 or 900 MHz radio, or use an external radio, cell phone or wireless packet data modem.
For base communications, select a radio from Trimble’s range of powerful communication products. Just the kind of flexibility you need!
For extended coverage and comprehensive error checking when roving, the Trimble 5800 works with signals from multiple base stations transmitting on the same radio channel. For even larger area coverage, at highest accuracies, the Trimble 5800 works with Trimble VRS™ networks.
Integrated Bluetooth® wireless technology enables cable-free communication between the receiver and your Trimble controller.
Built for the field
As a rover, the Trimble 5800 is not only lightweight and cable-free; it also consumes minimal power. Two miniature batteries will power the receiver for up to 11 hours – at least enough for a full working day.
Environmentally rated to IPX7, and submersible to a depth of 1 m, the Trimble 5800 is rugged enough for any job. It can withstand a drop of up to 2 m on to a hard surface.
Wide range of applications
The 5800 GPS system is ideal for a wide range of positioning applications, including:
- Survey
- Construction
- Asset management
It offers you the accuracy, flexibility, and ease of use you need for all your survey-grade GPS applications.
Key Features
- Purpose-built integrated GPS receiver for improved productivity
- Scalable from L1, postprocessing to full RTK configurations
- Lightweight design for reduced fatigue on all-day operations
- Cable-free rover for more flexibility and ease-of-use in the field
- Accurate, reliable and rugged
Technical Specifications
| PERFORMANCE SPECIFICATIONS | |
| Measurements |
|
| Code differential GPS positioning | |
| Horizontal | ±0.25 m +1 ppm RMS |
| Vertical | ±0.50 m +1 ppm RMS |
| WAAS differential positioning accuracy | Typically <5 m 3DRMS |
| Static and FastStatic GPS surveying | |
| Horizontal | ±5 mm +0.5 ppm RMS |
| Vertical | ±5 mm +1 ppm RMS |
| Kinematic surveying | |
| Horizontal | ±10 mm +1 ppm RMS |
| Vertical | ±20 mm +1 ppm RMS |
| Initialization time | Single/Multi-base minimum 10 sec +0.5 times baseline length in km, up to 30 km |
| Initialization reliability | Typically >99.9% |
| HARDWARE | |
| Physical | |
| Dimensions (W x H) | 19 x 10 cm (7.5 x 3.9 in), including connectors |
| Weight | 1.31 kg (2.89 lb) with internal battery, internal radio, standard UHF antenna. 3.67 kg (8.09 lb) entire RTK rover including batteries, range pole, controller and bracket |
| Temperature | |
| Operating | –40 °C to +65 °C (–40 °F to +149 °F) |
| Storage | –40 °C to +75 °C (–40 °F to +167 °F) |
| Humidity | 100%, condensing |
| Water/dustproof | IP67 Dustproof, protected from temporary immersion to depth of 1 m (3.28 ft) |
| Shock | Non-operating: Designed to survive a 2 m (6.6 ft) pole drop onto concrete. Operating: to 40 G, 10 msec, sawtooth |
| Vibration | MIL-STD-810F, FIG.514.5C-1 |
| Electrical | |
| Power | 11 to 28 V DC external power input with over-voltage protection on Port 1 (7-pin Lemo) • |
| Battery | Rechargeable, removable 7.4 V, 2.4 Ah Lithium-Ion battery in internal battery compartment. Power consumption is <2.5 W, in RTK mode with internal radio |
| Operating times | Internal battery 5.5 hours with 450 MHz receive only (varies with temperature) |
| Certification Class | Class B Part 15, 22, 24 FCC certification, Canadian FCC, CE, Mark approval, and C-tick approval |
| Communications and Data Storage | |
| Communications |
|
| Data Storage |
|